| Rebar Thread Rolling Machine JH-40D |
| (Rebar Rib-stripping and thread rolling Machine） |
| |
|
|
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. |
| JH-40D is easy to adjust. It adds the screw pitch angle mechanism. It is especially fit for the rebar splicing in bridge-piles and tunnel construction |
| 1. Peel ribs of rebar end |
| 2. Roll thread automatically |
| 3. Connect the thread rebar ends with rebar coupler |
| |
|
|
|
|
Technical Parameters
|
|
|
|
Electric motor power
|
4KW
|
|
|
|
Working voltage
|
Three-phase380V/50HZ
|
|
|
|
Rotate speed:
|
40-62r/min
|
|
|
|
Rebar Dia
|
14mm-40mm
|
|
|
|
Thread length
|
100mm
|
|
|
|
Thread pitch
|
2.5mm, 3mm, 3.5mm
|
|
|
|
Rebar standard
|
HRB335,HRB400, HRB500
|
|
|
|
Gross weight
|
390 KGS
|
|
|
|
Dimension
|
1250*750*1050mm
|
---------------------------------------------------------------------------------------------------------
| Rebar Thread Rolling Machine JH-40E/F |
|
| (Rebar Rib-stripping and Thread Rolling Machine) |
|
| |
|
|
|
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. |
|
| JH-40E/F is safe to use and designed reasonable in construction operating. It can make much longer parallel threads on head of rebar. |
|
| |
|
|
|
| 1. Peel ribs of rebar end |
|
| 2. Roll thread automatically |
|
| 3. Connect the thread rebar ends with rebar coupler |
|
| |
|
|
|
|
|
Technical Parameters
|
|
|
|
|
Electric motor power
|
4KW
|
|
|
|
|
Working voltage
|
Three-phase380V/50HZ
|
|
|
|
|
Rotate speed:
|
62r/min
|
|
|
|
|
Max output torque:
|
400KN 530KN
|
|
|
|
|
Rebar Dia
|
14mm-40mm
|
|
|
|
|
Thread length
|
JH-40E 200mm
|
|
|
|
|
|
JH-40F 300mm
|
|
|
|
|
Thread pitch
|
2.5mm, 3mm, 3.5mm
|
|
|
|
|
Rebar standard
|
HRB335,HRB400, HRB500
|
|
|
|
|
Gross weight
|
530 KGS
|
|
|
|
|
Dimension
|
1250*750*1050mm
|
----------------------------------------------------------------------------------------------------------
| Rebar Thread Rolling Machine JH-40K |
|
| (Rebar Rib-stripping and Thread Rolling Machine) |
|
| |
|
|
|
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. |
|
| JH-40K not only adjusts freely in the range 14-40mm using the rib-stripping plate but also eliminates the problem that the rebar head with screw head often becomes bigger, further guaranteeing the construction quality. |
|
| 1. Peel ribs of rebar end |
|
| 2. Roll thread automatically |
|
| 3. Connect the thread rebar ends with rebar coupler |
|
| |
|
|
|
|
|
Technical Parameters
|
|
|
|
|
Electric motor power
|
4KW
|
|
|
|
|
Working voltage
|
Three-phase380V/50HZ
|
|
|
|
|
Rotate speed:
|
49-62r/min
|
|
|
|
|
Rebar Dia
|
14mm-40mm
|
|
|
|
|
Thread length
|
65mm
|
|
|
|
|
Thread pitch
|
2.5mm, 3mm, 3.5mm
|
|
|
|
|
Rebar standard
|
HRB335,HRB400, HRB500
|
|
|
|
|
Gross weight
|
450 KGS
|
|
|
|
|
Dimension
|
1250*750*1050mm
|
---------------------------------------------------------------------------------------------------
| Rebar Thread Rolling Machine JH-50 |
| (Rebar Rib-stripping and thread rolling Machine) |
| |
|
|
|
| The rebar thread rolling machine series is mainly used to process the ribbed rebar to provide the rebar head with parallel screw thread in construction. |
| JH-50 is to extend the dia of rebar. It is especially fit for the rebar splicing in bridge-piles and tunnel construction |
| 1. Peel ribs of rebar end |
| 2. Roll thread automatically |
| 3. Connect the thread rebar ends with rebar coupler |
| |
|
|
|
|
|
Technical Parameters
|
|
|
|
|
Electric motor power:
|
5.5KW
|
|
|
|
|
Working voltage
|
Three-phase380V/50HZ
|
|
|
|
|
Rotate speed:
|
49-62r/min
|
|
|
|
|
Rebar Dia:
|
12mm-50mm
|
|
|
|
|
Thread length:
|
120mm
|
|
|
|
|
Thread pitch:
|
2.5mm, 3mm, 3.5mm
|
|
|
|
|
Rebar standard:
|
HRB335,HRB400, HRB500
|
|
|
|
|
Gross weight:
|
450 KGS
|
|
|
|
|
Dimension:
|
1250*750*1050mm
|
---------------------------------------------------------------------------------------------------------
| Rebar Upsetting Machine & Rebar Threading Machine |
| |
|
|
|
|
| Bar Splice is a parallel thread mechanical splicing system designed for the connection of concrete reinforcing bars from Φ12mm~Φ40mm. |
| 1. Use the rebar upsetting machine to forging the end of rebar. |
| 2. Use the thread cutting machine to cut threads on the enlarged end of rebar |
| 3. Use the coupler to link the two ends of rebar. |
| |
|
|
|
|
|
Technical Parameters
|
|
|
Rebar upsetting machine
|
Rebar threading machine
|
|
|
Pressure range (rebar)
|
12mm-40mm
|
Cutting rage (rebar)
|
12mm-40mm
|
|
|
Oil pressure flux
|
5.6L/min
|
Gyrating speed
|
32r/min
|
|
|
Max pressure
|
63Mpa
|
Reverse gear
|
46r/min
|
|
|
Electric power
|
4KW
|
Electric power
|
2.5/3KW
|
|
|
Dimension
|
1225mm*570mm*1100mm
|
Net weight
|
590KGS
|
|
|
Net weight
|
620KGS
|
|
|
